Non Nema
Non Nema

Can you run a welder (Lincoln sp-175t) on dryer NEMA 10-30R receptacle?
My welder (Lincoln sp-175t) has a rated input of 20A at 230V, so the dryer outlet should be able to handle this. The dryer receptacle is a NEMA 10-30R (3-prong 125/250V 30A), which has two hots and a neutral. This is standard for older dryers. I read that the neutral return can be used as a ground for the welder because the neutral is connected to ground at the panel (I will verify this). On newer 4-prong hookups the extra ground has been added by code for keeping the ground and neutral separate on devices for safety, so there is a non-current bearing reference.
Does this sound correct so that I will be able to operate my welder off the dryer outlet?
The plug on the welder is not a NEMA 10-30P, so this is why I was asking because it will need to be changed, but I think that it will work fine.
The two "hots" as you phrase it are ,phase and neutral.. Yes neutral is grounded at the switch board. Yes the earth is run separately.. Yes all of what you say is correct. Yes you can use your Lincoln Welder using the existing power supply. 20 amps is fine to draw from a 30 amp rated supply.
![]() |
![]() Cutler Hammer Size 3 Non Reversing AN16KNO Nema 3R US $650.00
|
![]() CUTLER HAMMER 400 AMP NON FUSED SAFETY SWITCH NEMA 1 US $269.00
|
![]() NON METALLIC NEMA 4X ENCLOSURE 20x28x10 HINGED COVER US $267.92
|
![]() SIEMENS 30 AMP 600 VOLT NON FUSED DISCONNECT NEMA 4X US $225.00
|
![]() NEMA 4X Non Metallic Switch Enclosure C1610 16x10x8 NEW US $167.00
|
![]() Square D 100 Amp non fused Disconnect Nema 1 New NIB US $150.00
|
![]() GE THN3362R 60A 600V 3PH Nema 3R Non Fuse DIsconnect US $150.00
|
![]() 10 Leviton Non NEMA Flanged Locking Inlets 30A 250V US $149.95
|
![]() 10 Leviton Non NEMA Locking Plugs 30A 125 250V US $109.95
|
![]() Siemens NF352 60amp 600v 3 Pole Non Fused Nema 1 NEW US $100.00
|
![]() SQUARE D 200 AMP NON FUSIBLE SAFETY SWITCH NEMA TYPE 1 US $99.99
|
![]() Allen Bradley NEMA Full Voltage Non Rev Starter Size 1 US $81.56
|
![]() Locking Receptacle NON NEMA 50A 125 250V Marinco US $74.95
|
![]() Leviton NON NEMA Locking Connector 50A 125V Marinco US $74.95
|
![]() Leviton NON NEMA Locking Plug 50A 125V Marinco US $74.95
|
![]() Leviton NON NEMA Locking Connector 50A 125 250V Marinco US $74.95
|
![]() Leviton Non NEMA Locking Plug 50A 250VDC 600VAC 3765 C US $64.95
|
![]() NON NEMA Locking Receptacle Outlet 50A 125V Marinco US $64.95
|
![]() Leviton Non NEMA Locking Plug 50A 250VDC 600VAC US $59.95
|
![]() Leviton Non NEMA Locking Outlet 50A 250VDC 600VAC US $59.95
|
![]() Leviton Non NEMA Locking Connector 50A 250VDC 600VAC US $59.95
|
![]() NON METALLIC NEMA 4X IP67 ENCLOSURE 8X11X7 HINGED COVER US $57.31
|
![]() NON METALLIC NEMA 4X IP67 ENCLOSURE 13X11X5 SCREW COVER US $53.38
|
![]() NON METALLIC NEMA 4X IP67 ENCLOSURE 15X11X5 SCREW COVER US $50.78
|
![]() New Carlon NJ644 Nema 12 Enclosure★6x4x4★Non Metallic US $49.99
|
![]() Non NEMA Locking Connector Twist Lock 50A 250VDC 600VAC US $49.95
|
Croatian Animal Band Aid "I Love Animals" - No Excuse (Nema isprike)


US $650.00
























